|
UCoat is
not a paint that will flake and peel; it is a commercial
grade, water based, two-coat epoxy coating system. Being
water based, there is virtually no odor associated with
UCoat. Being industrial quality, it is just as durable, or
more so, than most solvent based epoxies. UCoat is also
moisture insensitive, there is no drying time needed after
cleaning and preparing the concrete floor. UCoat is roller
applied directly to a wet-damp surface to achieve permanent
adhesion. Part C, the co-plastimer additive in the bond
coat, allows UCoat to flow and dry at the proper rate,
penetrating the porous concrete or wood floor and
permanently bonding to the substrate.
| UCoat water-based
hybrid epoxy coating is applied in two coats with
roller and brush drying to a durable satin finish.
Optional top coat kits are available for a
High-Gloss or Decorative Flake finish. |
|
 |
 |
 |
Each
UCoat Kit comes complete with one of seven colors of
commercial grade epoxy and the necessary tools to coat a
typical 2½ car garage (White or Beige floors may require
additional material). For larger areas, material-only single
and double packs are available. A step-by-step video is also
included to show how to achieve professional results. The
instruction booklet contained in the kit also provides
detailed directions for the application of UCoat and a
warranty card to be returned to UCoat It America to enact
the limited lifetime warranty.
UCoat
may be applied to any properly prepared wood or concrete
floor. UCoat is resistant to damage from chemicals,
abrasions, and impacts. It stands up to moisture, welding
spatter, jack stands, and with the application of UTex™, the
anti-slip additive included in every kit, UCoat is safe to
walk on even when the floor is wet.
 |
 |
 |
|
UCoat It floor
coatings are ideal for garages, basements, patios,
race shops, kennels, airplane hangars, barns, and
any other place a durable, protective finish is
desired. |
UCoat is
much easier to clean than bare concrete. Dirt and oils are
easily mopped or rinsed and squeegeed away. UCoat’s
protective finish keeps contaminants from diving down into
the floor so it remains looking fresh and new. UClean is
recommended for routine maintenance and cleaning of all
UCoat finishes.
UCoat can be
used as a durable, standalone, satin finish or top coated
using one of our decorative kits for a high-gloss or
decorative flake finish:
- Add
UGloss — for a high-gloss floor (Non-automotive
floors only)
- Add
UGloss-AF — for a high-gloss (Automotive floors)
- Add
UFlek
— for a high-gloss, decorative flake finish
(Non-automotive floors only)
- Add
UFlek-AF — for a high-gloss, decorative flake finish
(Automotive floors)
|
