Home I About Us I Contact Us

 

Products
Services
Manufactures
NSNs
Specifications
Flamemaster
Sealants

Also view are: SiliconesPotting Compounds , Primers , Coatings ,  Adhessives
   
Electrical Sealants Air Craft Fuel Tank & Pressure Cabin Sealants Special and Epoxy Sealants
Your sure to find a sealant that's right for you from our full line of Flamemaster sealants. Select a type of sealant above or enter a product # in the search box below.
 

Enter a product # or a one word description of the product your looking for.


 
Electrical Sealants     Back to Sealants' menu   Specifications

CS 3100-
Potting & Sealing Compound
Potting & sealing compound for sealing and moisture proofing adhesive bonded structures.  Available in three application times and three consistencies.
  Mil-PRF-8516G
CS 3100M- Potting & Sealing Compound
Potting &
sealing compound for sealing and moisture proofing adhesive bonded structures.  Available in three application times and three consistencies.
  STM-M225-5
CS 3104M- Low Adhessive Potting Compound
Similar to CS 3100 with the exception of Low Adhesion.  Its low adhesive strength makes it possible to remove the encapsulating material from connections.
  131208-27, modified Mil-PRF-8516G to Flamemaster Specification
CS 3209- Electrically Conductive Sealant
Electrically Conductive Sealant
- Used as a faying surface sealant.  Meets all the requirements of   AMS-S- 8802.  Designed to conduct static electricity
  STM 40-109 Rev. C
CS 3802- Room  Temperature Silicone
Is used as an insulating coating and thermal barrier in misssile applications where heat transfer must be retarded.

  Areojet - AGC 34076
CS 3808- Room  Temperature Silicone
Room temperature chemically cured. Used for aircraft, missile, and electronic applications.
  BMS-8-68 (Boeing
 

Air Craft Fuel Tank
& Pressure Cabin Sealants
      Back to Sealants' menu
   

CS 1900-
Firewall Sealant
Firewall Sealant Used for sealing firewall structures.  It is elastomeric and is able to withstand intermittent temperatures of up to 2000 deg. F.
  Mil-S-38249 Type I
CS 2415- Aluminum Exterior Sealant
Aluminum Exterior Sealant recommended for sealing external seams, depressions and gaps on aircraft to yield weather tightness and achieve aerodynamic smoothness.  Withstands jet fuels and weathering.  Available in Application Times of 1/2 hour and 2 hours.
  DMS 1819C, Mil-S-38228 Cl A, Cl B, STM40-006 Class A
CS 3105- Junction Box Sealer
Thixotropic, polysulfide sealant suitable for use in edge seal encapsulation. Easily applied with an extrusion gun or spatula
Flamemaster Specification  8030-01-469-7150
CS 3201- Sealing Compound
For aircraft Structures. Cures at room temperature to a flexible resilient rubber with excellent adhesion to metals. Available Class A and Class B various application times.   Colors - Tan or Black
  AMS 7124 formerly Mil-S-7124 & Mil-S-7502
CS 3204 Class A & B- Integral Fuel Tank Sealant
Designed to withstand the attack of sulfur compounds present in jet fuels. Also used as a pressurized cabin sealant.
  AMS-S-8802 formerly Mil-S-8802F
Type II
CS 3204R- Integral Fuel Tank Sealant
Designed to withstand the attack of sulfur compounds present in jet fuels. Also used as a pressurized cabin sealant. This is a more rapid curing material.
  AMS-S-8802 formerly Mil-S-8802F
Type II
CS 3210- Low Density Pressurized Cabin Sealant
The low specific gravity of 1.00 can result in substantial weight savings over conventional sealant.
  STM 40 107
CS 3213- Corrosion Inhibitive Sealant.
A corrosion inhibitive sealant for use in the sealing and coating of metal components on weapons and aircraft systems for protection against corrosion when subject to contact with water and/or weathering.
  MIL-PRF-81733
CS 3330 Class A & B- Access Door Sealant
Used as a strippable fillet for integral fuel tanks and pressurized cabins, as a strippable fillet and as a gasket for removable parts.  Available Class A or Class B, 1/2 hr. or 2 hrs.
  AMS 3284 Type 1
Formerly Mil-S-8784B
CS 3330 CL Class A & B- Corrosion Inhibitive Access Door Sealant
A non chromate Corrosion inhibiting sealant, used as an access door sealant for integral fuel tanks and pressurized cabins, as a strippable fillet and as a gasket for removable parts. 
  AMS 3284 Type 2
CS 3600- Top Coat & Adhesive
Fuel tank, Buna N Type and high bond strength adhesive.  Protective coating for synthetic rubber sealant and metal surfaces of integral fuel tanks.  Protection against oils, fuels, fresh or salt water, corrosion and weathering. 
  AMS 4383 formerly  Mil-S-4383C (2)
CS 5306- \
CS 5310-  ) Polythioether Quick Repair Fuel Sealant
CS 5311- /

Used on aircraft to yield weather tightness and fuel resistant seal.  Able to cure at lower temperatures.  Faster than standard sealant.  CS 5310 Class B-2, CS 5306 Class A & Class B available 1/4 hr. & 1/2 hr.  CS 5311 available Class A and Class B, 2 hr. 1/2 hr. and 1/4 hr

  AMS 3277 Type I 
Formerly Mil-S-29574

AMS 3277 Type II -
No Primer  required formerly Mil-S-29574
CS 5447- Polythioether Windshield Sealant Fast Cure
High temperature sealant.  Developed for the installation and sealing of windshield and transparencies on high-speed aircraft.
  Flamemaster  Specification
CS 5500 Class A & B- High Temperature Fuel Tank & Fuselage
Used for sealing fuel tanks and on aircraft fuselage.  Withstands higher temperatures than the standard AMS-S-8802 sealant.  Available in Class A or Class B, with various application times. 
  AMS 3276 Formerly Mil-S-83430, FMS 1044, FMS 3055
CS 5500 Cl- Corrosion Inhibitive Sealant
Permapol P5 polymer, High temperature, sealant - Non chromated.  Will be used to replace Mil-S-81733 in some applications
 

AMS3265
FMS 3104 Formerly
FMS 3055-1

CS 5530- High Temperature Low Density Fuel & Fuselage
High temperature resistant Low Density Sealant.  Fuel tank and fuselage sealant.   Density 1.3
  Flamemaster Specification Test to AMS 3281 
CS 5547- Aircraft Windshield Sealant
Room Temperature cure, high temperature sealant. Used when installing and sealing windshields and transparencies
  Flamemaster Specification
 
   

Special and Epoxy Sealants     Back to Sealants' menu
   

CS 91- Epoxy Sealant Compound
Used for sealing and moisture proofing adhesive bonded structures.  Available in three consistencies.
  STM 40-601
CS 2305- Barrier Coating
Used for tank farms, refineries, oil fields, marine tankers and cargo ships.  Designed to protect steel surfaces against corrosion.  Used as a pour in place liner to protect ground water from contamination.
  Meets Florida EPA requirements
CS 2725- Epoxy Bonding Compound
High adhesion to most construction materials.  Used for repairing spalled and cracked areas in concrete, plaster, stucco, stone, slate, wood and tile.  Also used as a mortar for ceramic tile, stone work, block and brick.
  DOD-C-24176   Type I and II
CS 2727- Flexible Epoxy Joint Sealer
Used as concrete joint sealer.  Excellent adhesion to concrete, wood and other materials without primer.  Lox compatible.
  Air Force Spec.
CS 3202- Optical Sealing Compound 
Used for bonding glass to metal in optical instruments or fire control instruments.  Standard application time about 3 hours. 
  Mil-S-11031B
AA 59293
CS 3204 WT- Weld Through Sealant
Conductive and fuel resistant faying surface sealant for metal parts joined by spot welding.
  MIS-31868C
CS 3810- Low Density Silicone Barrier
Easily applied, heavy coating to be used in areas where thermal insulation is required. Excellent adhesion, high electrical insulation properties, short term high temperature exposure to 600 deg. F or more.
  Various Company Specs.
CS 7707- Nylon Epoxy Coating
Used as a coating on flexible, semi rigid and rigid substrates for protection against Skydrol, hydraulic fluids, fuels, oils, salt water and ozone.
  DPM 2389
CS 9903- Primer
Used for bonding room temperature vulcanizing silicones to carious substrates. Also, used to prime other rigid surfaces such as glass, epoxy, and polyester.
  Mil-P-47215, MMS-K328
CS 9943- Tack Free Accelerator
Accelerates the cure on the surface of the sealant, forming a thin skin which quickly becomes tack free. Eliminates problems of adherence of metal chips, dust etc. from airborne contaminates.
  Lockheed Martin
CS 9960- Primer - Plastics
Used to prime some surfaces for potting compounds. Also used to prime windshield surfaces prior to the application of sealant.
  Flamemaster Specification
     
Back to Sealants Menu
   

                                            
 
accrabond  beacon  adhessives  dow corning  flamemaster  chem seal  talco  industries  u coat it aviation products manufactures
accra
bond  beacon  adhessives  dow corning  flamemaster  chem seal  talco  industries  u coat it

Copyright 2010 Aviation Products, Inc. - All Rights Reserved